CompTIA Network+ Simulation 13

You have been tasked with setting up a wireless network in an office. The network will consist of 3 access points and a single switch. The network must meet the following parameters.

The SSIDs need to be configured as corpnet with a key of S3cr3t! The wireless signals should not interfere with each other.

The subnet the Access points and Switch are on should only support 30 devices maximum The access Points should be configured to only support TKIP clients at a maximum speed

Instructions: Click on the devices to review their information and adjust the setting of the APs to meet the given requirements.

Correct Answer:

Exhibit 1 as follows
Access Point Name: AP1
IP Address: 192.168.1.3
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 1
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!

Exhibit 2 as follows
Access Point Name: AP2
IP Address: 192.168.1.4
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 6
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!

Exhibit 3 as follows
Access Point Name: AP3
IP Address: 192.168.1.5
Gateway: 192.168.1.2
SSID: corpnet
SSID Broadcast: yes
Mode: G
Channel: 11
Speed: Auto
Duplex: Auto
WPA Passphrase: S3cr3t!

CompTIA A+ Simulation 1

You need to configure your mobile device to send and receive electronic messages from your company. Your mobile device must be able to truly synchronize the message state with your desktop so that when a message is read on your desktop, it is marked as read on your mobile device. These are the proper parameters:

1. Email address: tech@techies.com
2. Password P@SSw0rd
3. POP.techies.com Port: 110 Security: None
4. IMAP.techies.com Port: 993 Security: SSL
5. SMTP.techies.com Port: 465 Security: TLS
6. Company SSID: Techies
7. Security: WPA2
8. Passphrase: P@SSwOrd
9. SSID is not broadcasted

Instructions: You are not authorized to use the Company’s WLAN. The outgoing server does not require login credentials. When you have completed the simulation, please select the done button to submit your answer.

Correct Answer:

CompTIA A+ Question J-63

A technician has replaced a bad internal WLAN card in a Windows 7 Professional laptop. The WLAN card is listed in Device Manager as enabled and working. Which of the following should be done NEXT to use the card?

A. Change the security passphrase of the network.
B. Configure encryption on the router.
C. The SSID of the network must be added to the connection.
D. The firmware and drivers must be updated to the latest version.

Correct Answer: C